Zonal and L/HIRF Analysis

This section discusses how to record the results of zonal analysis and lightning/high intensity radiated field (L/HIRF) analysis based on the ATA Operator/Manufacturer Schedule Maintenance Development (MSG-3) guidelines.

The way you perform L/HIRF analysis depends on the MSG-3 guidelines that you have selected for the project in the Project Properties.

  • If your project uses one of the versions of Revision 2015 Vol 1 and Vol 2 that support identifying L/HIRF Significant Items (LHSIs), L/HIRF analyses are performed for the LHSIs identified for the ATA systems and/or sections; these analyses use the L/HIRF Hierarchy tab. Zonal analysis is performed using the Zonal Hierarchy tab on the System panel.
  • Prior to Version 2019, L/HIRF analyses in MPC were performed for zones defined and selected within the zonal hierarchy. This methodology continues to be supported for all versions of the guidelines that do not support LHSI identification. In projects using these guidelines, you will use the Zonal-L/HIRF Hierarchy tab on the System panel for both zonal and L/HIRF analyses.

For convenience, this help file refers to projects using the MSG-3 guideline versions that support LHSI identification as LHSI projects, and to projects using all other guideline versions as non-LHSI projects.

The tabs used for zonal and  L/HIRF analyses can be displayed on the left side or the top side of the Project window. To change the location of the panel, choose View > Workspace Layout > Change Orientation.

For information about aircraft systems and powerplant analysis, see Systems and Powerplant Analysis. For information about aircraft structural analysis, see Structural Analysis.

The steps for zonal analysis are:

  • Defining the relevant zones (major zones, major sub-zones and zones) in the Zonal Hierarchy tab or the Zonal-L/HIRF Hierarchy tab.
  • Using the Zonal selection questions to determine which of the analyses are recommended. In non-LHSI projects, this step also includes determining whether L/HIRF environmental damage/accidental damage (ED/AD) analysis is recommended.
  • Performing the recommended standard and/or enhanced zonal analyses.
  • Selecting/defining the recommended zonal inspection tasks.
  • Generating a report of the analysis results.

The steps for L/HIRF analysis are:

Note: The structural, zonal and L/HIRF analysis functionality is available only in MPC Plus. If you are an MPC Standard user, please contact ReliaSoft for information about upgrading to MPC Plus.

Related Topics and Links